Safety instructions
Standards and environmental conditions
Lenze • BA v200-C v800-.C • 1.1 57
2.3 Standards and environmental conditions
Conformity und Approbation
CE 2014/30/EU
2014/35/EU
2011/65/EG
1999/5/EG
EMC Directive
Low Voltage Directive
RoHs Directive
R&TTE Directive
UL UL 61010-1
UL 61010-2-201
CAN/CSA-C22.2 No. 61010-1
CAN/CSA-C22.2 No. 61010-2-201
Programmable Controllers
UL File No. E343358
Protection of persons and device protection
Type of protection IP 65 front / IP20 rear (not evaluated by UL)
operating conditions
Vibration resistance Vibration ( IEC/EN 60721-3-3) 3M5 ; 10 m/s2, 2 … 200 Hz
Shock (IEC/EN 60721-3-3) 3M5 ; 250 m/s² t = 6ms
Mounting place The control system is designed for operation in switch cabinets and
machines.
Use of the device is only permitted
• in enclosed buildings
• in non-explosive atmospheres
• at altitudes below 2000 m
• in environment with max. degree of pollution 2 (IEC/EN 61131-2)
Climatic conditions
Storage IEC/EN 60068-2-1 -20 …+60 °C, 10 ... 85 % air humidity
without condensation
Transport IEC/EN 60068-2-1 -20 …+60 °C, 10 ... 85% air humidity
without condensation
Operation IEC/EN 60068-2-14 v200/v800 -Cabinet 17“:
0 …+50 °C, 10 ... 85% air humidity
without condensation
v200/v800 -Cabinet 25“:
0 …+45 °C, 10 ... 85% air humidity
without condensation
To Next Page
Loading...
