What does continuous red light on Leuze electronic BCL 8 S 2 status LED mean?
If the status LED on your Leuze electronic Barcode Reader shows a continuous red light, it indicates an internal device error. In this case, send the device in for testing.
What to do if Leuze electronic Barcode Reader status LED is off?
If the status LED on your Leuze electronic Barcode Reader is off, the cause is likely that no supply voltage is connected to the device. Check the supply voltage.
General| Type | Barcode Reader |
|---|---|
| Model | BCL 8 S 2 Series |
| Light Source | LED |
| Wavelength | 650 nm |
| Protection Class | IP 65 |
| Interface | RS 232, RS 422, USB, Ethernet |
| Code Types | Code 39, Code 128, EAN, UPC |
| Supply Voltage | 10 V to 30 V DC |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Weight | 200 g |
To Next Page
