Lexmark C510 - Page 147

Network Menu
147
Using printer menus
PS
SmartSwitch
To configure the printer so it
automatically switches to
PostScript emulation when a print
job received through the network
port requires it, regardless of the
default printer language.
On* Printer examines data on the
network interface connection and
selects PostScript emulation if the
data indicates that is the required
printer language.
Off Printer does not examine the
incoming data. The printer uses
PCL emulation to process the job if
PCL SmartSwitch is On, or uses
the default printer language
specified in the Setup Menu if PCL
SmartSwitch is Off.
Std Net
Setup
To configure an internal print
server.
Values for this menu item are supplied by the
specific print server. Select the menu item to see
the available values.
Note: Refer to the documentation on the
drivers CD for more information.
Menu Item Purpose Values