2-4 Service Manual
Lexmark S400 Series
1100 Paper Jam There is paper jammed in the
All-In-One.
Technical Support Center:
Clear the paper jam, and resend the print
job.
Service:
Clear the paper jam, and resend the print
job.
1101 Paper Out The All-In-One is out of paper. Technical Support Center:
Load paper.
Service:
Load paper. If the problem remains, then
check the paper sensor.
1102 Incorrect Printhead Printhead ID is not valid. Technical Support Center:
Replace the printhead with the correct
printhead.
Service:
Replace the printhead with the correct
printhead.
1103 Missing Printhead Printhead is missing. Technical Support Center:
Install a printhead.
Service:
Install a printhead.
1104 Printhead Order Unsupported order of
printhead.
Technical Support Center:
Install the correct printhead.
Service:
Install the correct printhead.
1105 Scan Back Alignment Failure Automatic alignment has failed. Technical Support Center:
Follow the instructions on the computer
screen to recover and align the print
tanks.
Service:
Follow the instructions on the computer
screen to recover and align the print
tanks.
Error
Code
Name Description Action
To Next Page
Loading...
