7 Click OK to close any printer software dialog boxes that are open.
8 Print the document.
Assembling a booklet
1 Flip the printed stack of papers over in the paper exit tray.
2 Take the first bundle from the stack, fold it in half, and then set it aside with the front page down.
3 Take the next bundle from the stack, fold it in half, and then stack it with the front page down on top of the first
bundle.
4 Stack the rest of the bundles with the front page down, one on top of the other, until the booklet is complete.
5 Bind the bundles together to complete the booklet.
Printing iron-on transfers
1 Load up to 10 iron-on transfers.
2 With an image open, click File Print.
3 Click Properties, Preferences, Options, or Setup.
4 From the Print Layout tab, select Mirror if you want the printer software to flip the image.
Select Normal if you have a program that automatically flips the image.
5 Click OK to close any printer software dialogs that are open.
6 Print the iron-on transfers.
Note: Do not force iron-on transfers into the printer.
Printing on custom-size paper
1 Load up to 100 sheets of custom-size paper.
2 With a document open, click File Print.
3 From the Quality/Copies tab, select a Quality/Speed setting.
4 Click the Paper Setup tab.
5 From the Paper Size section, select Paper and then select Custom Size.
6 Select the measurement units to use.
7 Use the sliders, or type the size of the paper loaded into the printer.
69
To Next Page
Loading...
