Canceling a scan job
• To cancel a scan job before your document is pulled down into the Automatic Document Feeder (ADF),
press
.
• If you have loaded a document into the Automatic Document Feeder (ADF) and the printer roller has started
pulling it into the printer, but you have not yet initiated your scan job:
1 Pull the control panel up.
2 Gently lift your original document out of the ADF.
3 Push the control panel down until it snaps into place.
• To cancel a scan job started in Productivity Studio, click Scan, and then click Stop.
82
To Next Page
Loading...
