Faxing using the control panel
CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical
or cabling connections, such as the power supply cord or telephone, during a lightning storm.
Warning: Do not touch cables or the printer in the area shown while actively sending or receiving a fax.
Sending a fax using the control panel
Entering a fax number using the control panel
1 From the control panel, press Fax Mode.
2 Enter a fax number using:
The keypad
Enter a fax number using the keypad.
Notes:
• You can include a calling card number as part of the fax number.
• A fax number can include up to 64 numbers and/or the symbols * or
#.
• Press Redial / Pause to insert a three-second pause in a number
you are entering to wait for an outside line or get through an
automated answering system. A comma appears on the display.
Quick Dial
Press Quick Dial 1, 2, 3, 4, or 5.
Note: For instructions on how to set Quick Dial buttons, see “Setting up
Quick Dial buttons using the control panel” and/or “Setting up Quick Dial
buttons using the computer.”
40
To Next Page
Loading...
