LG MultiSITE MS8000 Series - Wi-Fi Network 3; 4

27
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Table 10: Wi-Fi Network 3 / 4 Parameter Details.
Conguration Parameters Default Value Signicance and Adjustments
Wi-Fi Status
Read Only
When not connected to a Wi-Fi network the status remains Idle. After the RC is on the
preferred Wi-Fi network, the status will be displayed as Ready.
Status value: Ready or Idle
Signal Strength
Read Only
Signal strength of the Wi-Fi network.
Range: 0 to 100%
IP address:
10.10.10.20
SSID:
Your Wi-Fi Network
Wi-Fi status
Ready
Signal strength
100%
3/4 Wi-Fi Network
The new SSID to access
the RC via the Configu-
ration web page.
The IP address to access the
Configuration web page.
NETWORK SCREENS
Wi-Fi Network 3 / 4
Wi-Fi Network 3 / 4
Figure 22: Wi-Fi Network 3 / 4 Display.
For MS8350 and MS8650