82
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
The Test Outputs screen allows manual override of specified outputs. After any output state is overridden, the command is cancelled after
one (1) minute of screen inactivity (auto exit to main screen) or when page is exited.
Use high caution when manually enabling outputs. It is the responsibility of the Installer / Service Contractor to maintain a safe operation environ-
ment during usage. There is a risk of physical injury and / or death.
Use high caution when manually enabling outputs so as to not cause damage to equipment. It is the responsibility of the Installer / Service Contrac-
tor to maintain a safe operation environment during usage.
These parameters can also be changed via BACnet; the changed parameter background will turn red to indicate the parameter’s value had
been overridden. The overridden value remains even if the user exits the main screen.
TEST OUTPUTS SCREENS
Test Outputs Screen 1 / 2
Test Outputs Screen 1 / 2
Figure 67: MS8350 Test Outputs Screen 1 / 2.
For MS8350 and MS8650
Figure 68: MS8650 Test Outputs Screen 1 / 2.
To Next Page
Loading...
