LG MultiSITE MS8000 Series - Introduction

7
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Introduction
This guide shows the User Interface instructions for the MS8350 Controller (Firmware Release version 2.1) and MS8650 Controller (Firmware
Release version 2.1) for User and Integrators.
MS8350 Controllers
For Commercial and Hotel HVAC Fan Coil Applications.
Features
• Auto / Low / Med / High Fan Speeds
• Low-voltage 24 Vac
• Customizable color digital touch screen interface with Multi-lan-
guage support
• BACnet
®
MS/TP or Modbus
®
• Automatic Demand Response (ADR) used to reduce energy load
when electric grid contingencies threaten supply-demand balance
• Custom LUA script can be uploaded to the Room Controller
• Role based configuration (password protected)
• Function code settings
• Function Code Search Tool
• Date and Time Display only when a network time synchronization
command is received
• Room temperature display
• On / Off Operation
• Auto / Cool / Heat / Fan Only Modes
• Occupied cooling and heating temperature setpoints
• Unoccupied cooling and heating temperature setpoints
• 7 day scheduling with mode
• Error code display during unit or system malfunction
MS8650 Controllers
For Rooftop Unit, Heat Pump and Indoor Air Quality Applications.
Features
• Auto / On / Smart Fan Speeds
• Low-voltage 24 Vac
• Customizable color digital touch screen interface with Multi-lan-
guage support
• BACnet MS/TP or Modbus
• Automatic Demand Response (ADR) used to reduce energy load
when electric grid contingencies threaten supply-demand balance
• Custom LUA script can be uploaded to the Room Controller
• Role based configuration (password protected)
• Function code settings
• Function Code Search Tool
• Date and Time Display only when a network time synchronization
command is received
• Room temperature display
• On / Off Operation
• Auto / Cool / Heat / Fan Only Modes
• Occupied cooling and heating temperature setpoints
• Unoccupied cooling and heating temperature setpoints
• 7 day scheduling with mode
• Error code display during unit or system malfunction
BACnet
®
is a registered trademark of ASHRAE.
Modbus
®
is a registered trademark of Schneider Electric USA, Inc.
INTRODUCTION