LG MultiSITE MS8000 Series - Test Outputs Screen 2; 2

83
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
UO11 binary
UO9 binary
Off
Off
Off
UO10 binary
UO12 binary
Off
2/2 Test outputs
Test Outputs values are LIVE. Any output gets displayed immediately for any value change according to the following:
1. If any BACnet priority array (1 - 16) includes a value, the displayed state background shows in red.
2. When toggling a value on the screen, the output directly energizes according to the selected value.
3. After any output state gets modified, all overrides get cancelled after one (1) minute of button inactivity, or if scrolling from one screen to
another screen.
Case A
Screen 2/2 display is dependent on Control type configuration. If mode is set to Floating or On/Off, binary options show.
Case B
Screen 2/2 display is dependent on Control type configuration. If mode is set to Analog, analog options show.
TEST OUTPUTS SCREENS
Test Outputs Screen 2 / 2
Test Outputs Screen 2 / 2
Figure 69: MS8350 Test Outputs Screen 2 / 2.
For MS8350 and MS8650
Figure 70: MS8650 Test Outputs Screen 2 / 2.
UO10 analog
0.0 Vdc
0.0 Vdc
UO11 analog
2/2 Test Outputs
Off
UO12 binary