LG MultiSITE MS8000 Series - LUA Generic Parameters 3; 3

98
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Table 72: LUA Generic Parameters 3 / 3 Parameter Details.
Conguration Parameters Default Value Signicance and Adjustments
Parameter A (AV25)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
Parameter B (AV26)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
Parameter C (AV27)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
Parameter D (AV28)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
Parameter E (AV29)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
Parameter F (AV30)
Default Value: 0
Default value can be changed by user.
The value(s) of this parameter depends on what is assigned to it using the LUA script
function.
3/3 Lua
0
8
Param. B (AV26)
Param. C (AV27)
Param. D (AV28)
Param. E (AV29)
Param. F (AV30)
0
0
0
Param. A (AV25)
5
Parameter defined by LUA script
displays in red text.
Default value is normally 0, but can
be configured to use a different
default value.
LUA Generic Parameters
The LUA settings include six (6) generic parameters that do not have a specific function or pre-configured functions. These parameters
can be used in custom LUA scripts to store a value. They are also user configurable in their default state, but when assigned a value via a
LUA script or via BACnet (Priority 1-16), they become read only (not configurable locally by the user) and the display color of the parameter
changes to red. These parameters can also be configured via ZigBee, however, they can still be modified locally by the user.
LUA SCREENS
LUA Generic Parameters 3 / 3
Figure 85: LUA Generic Parameters 3 / 3 Display.
For MS8350 and MS8650