63
User Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Table 46: Display Screen 1 / 2 Parameter Details.
Conguration Parameters Default Value Signicance and Adjustments
User HMI
Default Value: 0
Sets layout of icons on the home screen for various applications. Refer to the “Customized
Screens” section for more information.
Range: 0 to 12
Color (HMI Color)
Default Value: White
Change background color of the display screen.
Choices: White, Green, Blue, Grey or Dark Grey
Main Display
Default Value: Temp.
Shows temperature or setpoint on main display.
Choices: Temperature or Setpoint
Standby Screen
Default Value: No
When the device is left unattended for 150 seconds, the standby image will appear. A
custom image can be uploaded using the Uploader Tool.
No: No Stand by image (Screen dims when no motion is detected)
Yes: Stand by Image is displayed after 150 seconds
Occ. Only: Standby image displays after 150 seconds. Screen turns off after 30 minutes
only in occupied or override mode.
Screen saver: Standby image displays after 150 seconds. Screen turns off after 30 min-
utes only in unoccupied or standby mode
Choices: No, Yes, Occupied Only or Screen Saver
Lock Screen
Default Value: No
Prevents the user from accessing the Room Controller until a password is entered. Screen
lockout starts 150 seconds after no activity on the Room Controller (when standby image
appears).
This functionality is enabled only if the below conditions are met:
• Standby image loaded
• Standby Screen = “Yes” or “Screen Saver”
• User Password = not 0
Choices: No or Yes
Contrast
Default Value: 0
Control screen contrast and brightness.
Range: -5 to +5
DISPLAY SCREENS
Display Screen 1 / 2
Display Screen 1 / 2
Figure 48: Display Screen 1 / 2.
For MS8350 and MS8650
To Next Page
Loading...
