LG MultiSITE MS8000 Series - Options

88
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
6/7 Configuration
Language English
Units °C
Low backlight 60 %
Night backlight 5 %
RH display Disable
Options
Occupancy cmd Loc occ.
Schedule type 7 days
Table 63: Options Parameter Details.
Conguration Parameters Default Value Signicance and Adjustments
Occupancy Cmd (Occupancy Command)
Default Value: Local occ
Loc occ: Occupancy is determined by local sequences (either PIR or schedule, as config-
ured under Occ. source).
Occupied: Force occupied mode.
Unoccup: Force unoccupied mode.
Choices: Loc occ, Occupied or Unocc.
Schedule Type
Default Value: 7 days
7 days: Independent scheduling identified by day of the week (Sunday - Saturday).
5+1+1 days: Weekdays scheduling and Independent Weekend scheduling identified as
Weekdays, Saturday and Sunday.
5+2 days: Weekdays scheduling and Weekend scheduling identified as Weekdays and
Weekend.
Choices: 7 days, 5+2 days or 5+1+1
Options
The options settings allow the Room Controller to function in Occupied or Unoccupied mode following a defined Schedule type set by the
user.
SCHEDULE SCREENS
Options
Figure 75: Options Display.
For MS8350 and MS8650