LG MultiSITE MS8000 Series - Page 40

40
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
8/9 C onfiguration
Calib. temp.
0.0 °F
RH sensor
None
Calib. humid.
0.0 %RH
Conguration Parameters Default Value Signicance and Adjustments
Calib. Temp. (Calibration Room
Temperature Sensor)
Default Value: 0°F
Room temperature sensor calibration. Offset can be added or subtracted to actual dis-
played room temperature.
Range: ± 5.0°F (± 2.5°C)
Calib. Humid. (Calibrate Humidity Sensor)
Default Value: 0.0%RHF
Offset that can be added or subtracted to actual displayed humidity.
Range: ± 15.0% RH
RH Sensor (Relative Humidity Sensor)
Default Value: Internal
Sets the source of the indoor room humidity. This parameter allows the user to designate
either the Room Controller (only models supporting humidity) or any of the bound wireless
devices that support humidity to act as the source for the room humidity.
Internal: Sets the Room Controller as the source for the room humidity.
WL 1 to WL 10: Sets the selected wireless ZigBee PRO device as the source for the room
humidity. Only one device can be selected.
Choices: None, Internal, WL1 to WL10
CONFIGURATION SCREENS
MS8350 Conguration 8 / 9
MS8350 Configuration 8 / 9
Figure 31: MS8350 Conguration 8 / 9 Display.
Table 23: MS8350 Conguration 8 / 9 Parameter Details.
For MS8350 Only