LG MultiSITE MS8000 Series - Page 80

80
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
SERVICE VIEW SCREENS
MS8650 Service View Screen 8 / 9
MS8650 Service View Screen 8 / 9
Figure 65: MS8650 Service View Screen 8 / 9.
For MS8650 Only
CO2 module
0x0000
None
8/9 Service View
CO2 err. code
CO2 level
CO2 FW rev.
CO2 S/N
0 PPM
Table 60: MS8650 Service View Screen 8 / 9 Parameter Details.
Conguration Parameters Default Value Signicance and Adjustments
CO
2
Module
Read Only
Shows if CO
2
value is being readied from internal sensor, wired sensor or CO
2
sensor
module.
Display Readings: None, Local, Error and Wireless
CO
2
Err. Code (CO
2
Error Code)
Read Only
Error code 0x0001 shows if there is an error with the sensor.
CO
2
Level
Read Only
Shows CO
2
level in ppm.
Display Readings: 0 to 2000
CO
2
FW Rev. (CO
2
Firmware Revision)
Read Only
Shows the Firmware version of the installed CO
2
sensor module.
CO
2
S/N (CO
2
Serial Number)
Read Only
Shows the serial number of the installed CO
2
sensor module.