LG MultiSITE MS8000 Series - Page 94

94
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Conguration Parameters Default Value Signicance and Adjustments
Address (Wireless Device Address)
Read Only
Shows short address of ZigBee PRO end device.
Status (Wireless Device Status)
Read Only
Shows the following status of ZigBee end device:
• None: N/A
• Closed: Door and Window Sensors
• Opened: Door and Window Sensors
• No Motion: Motion Sensor only
• Motion: Motion Sensor only
• Normal: Water Leak Sensor only
• Leak: Water Leak Sensor only
Temperature (Wireless Device Temperature)
Read Only
Displays the temperature value received from the wireless device. If the wireless device
does not support temperature measurement, this object is not displayed.
Table 68: Device X Parameter Details, continued.
WIRELESS SCREENS
Device X
For MS8350 and MS8650