LG N2B1 - Page 110

. LG Network Storage Web Menu Use (for LG Network Storage administrators)
110
C. Connection on a Mac
① Activate iSCSI initiator.
Go to System Preferences -> globalSAN iSCSIㄴ
② Find the iSCSI target. If the IP address is 192.168.10.2, see below.
Go to globalSAN iSCSI -> Portals and press “+” and enter 192.168.10.2 and
press “OK”.
If a mandatory certification (CHAP) procedure has been set up in the web
setting, enter the required information by pressing the Advanced button in
the above window.
All manuals and user guides at all-guides.com