. RAID trouble shooting
1
Appendix A Volume Construction & RAID Configuration
This section describes volume configuration and supported RAID level. When
configuring volume using RAID, the use of Disks of the same manufacturer and capacity
is recommended to maximize stability and efficiency of configuration. In the case that
the Disks differ in capacity and trademark, data may be lost due to low system stability
and efficiency. In the case that the volume of the damaged Disk must be amended,
relevant data must first be backed up.
∙ Single Disk (None) volumes
The volume can be configured to each Disk without configuring the RAID. This
issimilar to methods with general PCs that use Disks.
If the Disk is damaged, the damaged Disk data may be lost.
1
2
A
A
B
B
To Next Page
Loading...
