. LG Network Storage Maintenance
1
Administrator password and network set up initialization
Open the administration web menu and go to the ‘Initialization’ tab of the ‘System >
Firmware’ menu. Following the explanation, push the ‘Initialization’ button and initialize
the default system values.
Warning: As this time all registered user information and data will be deleted, and
cannot be recovered.
∙ LG Network Storage default value initialized items
① System administrator ID, password: admin, admin
② Network set up /TCP/IP configuration: DHCP mode will be set up as default
mode
③ Network set up/TCP/IP configuration : Jumbo frame inactivity
④ System device/IP filter: All connections are allowed
⑤ RAID components
⑥ Service set-up value
⑦ User/folder/group list
∙ Log in to the LG Network Storage using the default user name and password:
ID: admin, password: admin
To Next Page
Loading...
