8. Firmware Upgrade HDMI-TPS-RX110AY – User's Manual 68
Step 3. Upgrade the device.
Click on the Start button to continue.
Two warning windows will pop up before starting upgrading the device:
▪ Do not unplug the power cable (or CATx cable
from the TPS input port in case of PoE) and the
Click OK to continue.
▪
upgrade. If you want to continue the procedure, click Yes.
about the presets in the section.
Details button opens a new window where the process is logged – see below.
To Next Page
Loading...
Need help?
General
