4. Device Concept MMX4x2 series – User's Manual 34
RS-232 Recognizer
(delimiter) has arrived or the timeout has passed after the last data. The last incoming serial data is stored
and it can trigger an action in Event Manager.
RS-232 Recognizer Example
MMX4x2
ç MMX4x2 (starts the communication on RS-232): PING
æ Login name:
ç MMX4x2 (sends the login name): Admin
æ Password:
ç MMX4x2 (sends the password): Admin
section).
Create the following events in the event manager:
E1.PING' on P1 port of RS-232 to
section.
E2. Set a condition where Login name:
('Admin
E3. Set a condition where Password:
('Admin
For more information about setting the events, see Event Manager section.
Messaging Options
:
Messaging Options – Sending and Receiving
INFO: In case of MMX4x2-HT200, the communication channels above are available via the TPS port, too.
Batch Commands
DIFFERENCE:
message.
LW3 over HTTP (Command Salvo)
Running Macros
In this case, the command sequences (macros) are stored in the device. You can create your custom macros
Macros section.
To Next Page
Loading...
Need help?
General
