MMX4x2 series – User's Manual 72
General LW2 Commands
Command and Response #producttype
<command>: <description>
...
Example
{lcmd}
...
INFO: The response is longer, not all the lines can be seen in the example.
The device responds its name.
Command and Response #producttype
{i}
(I:<PRODUCT_TYPE>
Example
{i}
(I:MMX4x2-HT200)
section.
Command and Response
Example
{label}
The device can be controlled with different control protocols. This command queries the active protocol of
the currently used control interface.
Command and Response #protocol
<protocol>
Example
Command and Response#rmwareversion
{F}
Example
{f}
<s> string, which may indicate special versions.
Viewing Firmware for All Controllers
Command and Response
{FC}
(CF·<DESC
(CF·<DESC
…
Example
{fc}
(CF MMX4x2-HT200 1.3.4b3)
(CF END)
The device has one control panel.
To Next Page
Loading...
