Activating the Horizontal Suspension
(optional equipment)
The horizontal suspension system is intended
to absorb horizontal (forward/reverse) impact
forces in certain rough-duty applications.
Push the lever (9) to the left to activate the
horizontal suspension.
Push the lever (9) to the right and allow it to
engage to block the horizontal suspension.
Adjusting the Temperature Control Sys-
tem (optional equipment)
The premium seat may be equipped with a
temperature control system instead of the ba-
sic seat heater. In this case, the switch (10)
will be present.
Push the switch (10) upwards to activate
the seat heater.
Push the switch (10) to the centre position
to deactivate the seat heater.
Push the switch (10) downwards to activate
the seat cooling.
Push the switch (10) to the center position
to deactivate the seat cooling.
NOTE
The maximum temperature is predefined.
10
7
6
2
4
1
5
3 9
d12020015a
4
Operation
Operator Compartment
64 Operating Instructions-1202 series LP 12028011590US-11/2022 - 04
To Next Page
Loading...
