24
Advanced Features
Picture Setting
Allows you to set your preferred picture mode.
1. Press the
button and then press the buttons to select the
PICTURE menu.
2. Press the
buttons to select the following picture options and then
press the OK button.
3. Press the
buttons to select the options and press the buttons to
adjust each option’s setting.
PICTURE
Picture Mode Standard
Colour Temperature
Aspect Ratio
Backlight
Noise Reduction
Picture Mode Select among picture mode: Standard / Movie / User / Dynamic.
Contrast Adjusts the difference between light and dark
levels in the picture (for User mode).
Picture Mode Standard
Contrast 50
Brightness 50
Colour 50
Sharpness 50
Tint 50
MENU
Brightness Increases or decreases the amount of white in
the picture (for User mode).
Colour Controls the colour intensity (for User mode).
Sharpness Adjusts the level of crispness in the edges
between light and dark areas of the picture (for
User mode).
Tint (For NTSC
format)
Adjusts the balance between red and green
levels
(Tint is only available for NTSC signal
reception).
Colour
Temperature
Select among colour temperature: Medum / Warm / User / Cool.
Adjusts the colour components independently to achieve a warm or
cool colour (for User mode).
• Red: Increases red tint
• Green: Increases green tint
• Blue: Increases blue tint
Colour Temperature Medium
Red 50
Green 50
Blue 50
MENU
Aspect Ratio Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Full / Zoom /
Subtitle / SmartZoom.
You can select the picture size which best corresponds to your viewing requirement.
Each source has different scale modes.
Noise
Reduction
Select to reduce the noise level of the connected device: Off / Low / Middle / High.
Backlight Adjusts the backlight setting of your TV. This controls the brightness and display performance of the
screen.
Increasing the backlight setting will increase the brightness and display performance
of the screen. The higher the setting is, the higher the power consumption. You
can select from 1-10 to strike a balance between the picture brightness / display
performance / power consumption. Reducing the backlight setting will help you
reduce power consumption and thus save money by reducing electricity bills.
4. Press the button to return to the previous menu or the EXIT button to exit the menu.
To Next Page
Loading...
