LINXON Installation | 5
LX218-Operating-Manual-en1-04-(1908) 33 / 90
NOTICE
Material damage from overheated device
The device heats up during operation and can overheat without sufficient ventilation.
► Please note the technical data.
► Ensure sufficient ventilation, especially on the ventilation slots on the left and right
of the device: There should be free space in the front, to the rear and sides of the
unit of at least 10 cm.
► Keep heat sources away from the device.
Prevention of measurement errors due to leaks in the helium source in the
device surroundings
We recommend that you regularly check around the device to a distance of 10 m all
large helium sources for gross leaks. Use a sniffer line to do this.
DANGER
There is a risk of injury when transporting the device.
The device is heavy.
► Only transport the device using two people.
1.
Place the device on a level, slip-proof work area.
2.
Prevent tripping hazards when placing the device and connecting lines.
To Next Page
Loading...