Linxon LX218 - Calibration

LINXON Appendix | 11
LX218-Operating-Manual-en1-04-(1908) 85 / 90
Calibration settings
Run-up > Configuration > Calibration settings > Access to CAL function
Run-up > Configuration > Calibration settings > Calibration request
Run-up > Configuration > Calibration settings > Calibration leak and operation mode
CAL
Calibration settings
Standby > Configuration > Test settings > Operation mode & mass
Standby > Configuration > Test settings > Filter & ZERO
Standby > Configuration > Test settings > Vacuum ranges
Standby > Configuration > Test settings > Evacuation time & ventilation
Standby > Configuration > Test settings > Gross leak protection
Standby > Configuration > Test settings > Pressure limits for sniffing mode
11.1.2.2 Calibration
Standby > Calibration > Background reassessment
Standby > Calibration > Check internal calibration leak