Linxon LX218 - Menu Navigation and CE Compliance

LINXON Appendix | 11
LX218-Operating-Manual-en1-04-(1908) 83 / 90
11 Appendix
11.1 Menu path
Pressing the navigation button brings you back to the measurement display regardless
of whether you were previously in a menu or sub-menu.
11.1.1 Run-up
Run-up > Language
Run-up > Configuration
Run-up > Information
11.1.2 Standby
Standby > Operation mode Sniffing
Standby > Configuration > Setpoint and alarm
11.1.2.1 Configuration
Global settings
Display settings
Standby > Configuration > Global settings > Display settings > Contrast
Standby > Configuration > Global settings > Display settings > Units
Standby > Configuration > Global settings > Display settings > Date and time
Standby > Configuration > Global settings > Display settings > Display area
Standby > Configuration > Global settings > Display settings > Lower display limit
Standby > Configuration > Global settings > Display settings > Language
Access control
Standby > Configuration > Global settings > Access control > Maintenance activated
Standby > Configuration > Global settings > Access control > Access to the CAL
function
Standby > Configuration > Global settings > Access control > Change device PIN
Standby > Configuration > Global settings > Access control > Change menu PIN
Maintenance and
service
Standby > Configuration > Global settings > Maintenance and Service > Device
maintenance