LINXON Operation | 6
LX218-Operating-Manual-en1-04-(1908) 41 / 90
Options Value range (min./max.) Comments
1E-11 mbar*l/s
1E-10 mbar*l/s
1E-9 mbar*l/s
Language
The following languages are available for the menu
• Chinese (factory setting)
• English
Standby > Configuration > Global settings > Display settings > Language
or
►
As an alternative, you can press "Language" in the "Run-up" window.
6.3.1.2 Access control
In the "Access control" window, you can specify the access rights for various control
areas
• Activating maintenance
• Access to the CAL function
• Change device PIN
• Changing the menu PIN
Standby > Configuration > Global settings > Access control
Activating maintenance
• Access to the maintenance menu
• Venting the turbo molecular pump during the run-up of the device. You need this
function to replace the lubricant reservoir of the SplitFlow 80 TMP. Further
information can be found in the separate operating instructions.
Options Value range Comments
Maintenance activated YES Access to the
"Maintenance and service"
menu is enabled. The TMP
can be vented during run-
up.
No Access to the
"Maintenance and service"
menu is not enabled. The
To Next Page
Loading...