Operating manual and inspection booklet
Overview
3435216 113
Function switch of the floor heater system
Fig. 90: Function switch (example)
In combination with the TRUMA Combi heater, the function
switches for floor heating are located above the entrance door.
Fig. 91: ALDE floor heating valve
In combination with the ALDE hot water heater, the floor heating
circuit can be switched on via a valve.
The valve is located near the ground directly next to the ALDE
heater.
5.4.3.4 Heating the floor electrically (optional)
Fig. 92: On-Off switch of the floor heating
system
The electric floor heating system (optional) is activated with the
On-Off switch (1). It is located above the entrance door. The
corresponding transformer is fitted in the bed frame or in the
bench.
The floor heating system does not require maintenance.
WARNING
Risk of fire hazard due to damaged heating foil!
The heating foil is laid directly under the PVC carpet.
There is a risk of fire if it is damaged.
• Therefore, for retrospective assembly or changes
to the furniture layout, always have these
modifications cleared in advance by your dealer.
To Next Page
Loading...