Operating manual and inspection booklet
Tightness guarantee
212 3435216
10.3 Inspection schedule and inspection certificates
Verification
NOTE
The annual tightness tests are prerequisite for the
tightness guarantee for the caravan body.
Verification of inspection must be completed by your
authorised dealer after every executed test; it must be
entered in the On-line system and printed for you.
10.3.1 Overview of the extent of the leak inspections
Visual inspections - interior
Entry section
Front bulkhead including connections on
the floor plate and side walls
Front bulkhead including connections on
the floor plate and side walls
Left side wall including connections on the
floor plate and side walls
Right side wall including connections on
the floor plate and side walls
Wheel housings left and right
Roof cut-outs
Connections to the driver's cabin
Visual inspections of the motorhome's
outside
Exterior sheet metal
Edge seals
Connections to the driver's cabin
Under-body
Damages to the exterior shell
To Next Page
Loading...