Operating manual and inspection booklet
Camping
3435216 165
6.4.6 Setting up the lighting
CAUTION
Risk of fire due to the use of incorrect light bulbs!
The use of incorrect light bulbs, in particular in the
sleeping and lift-up bed areas, can generate
excessive heat and cause a fire.
• Only use approved light bulbs.
• Only LED light bulbs are permitted in the lift-up
bed area.
Depending on the selected model and equipment, the living and
sleeping areas are fitted with various types and different number
of lamps, e.g., ceiling lights, spotlights, light strips and corner
lights.
Changing light bulbs is simple. Depending on the model:
1. Carefully open and remove the housing.
2. Remove the broken bulb from its socket.
3. Install the new bulb.
4. Carefully place and close the housing.
If there are defects in the lighting fixtures that you cannot
correct yourself, visit a customer service facility!
Life-threatening danger due to electric shock!
Danger of electric shock potentially resulting in
serious or fatal injury when working on electrical
equipment.
• Any repair tasks on the electrical system must be
performed by qualified personnel.
• Replace defective fuses only after the cause of the
fault has been identified and rectified.
To Next Page
Loading...