LMC CRUISER - Sitting and Sleeping; Converting the Sitting Area into Berths; Adjusting the Tabletop of the (Optional) Primero Comfort Pedestal Table

Operating manual and inspection booklet
Camping
156 3435216
6.4 Sitting and sleeping
6.4.1 Converting the sitting area into berths
Fig. 161: Lowering the hook-in table
Converting the hook-in table
1. Tilt the tabletop up and remove from the wall rail.
2. Depending on the design of the table leg: Either remove the
support tube or fold down and lock the articulated leg.
3. While in tilted position, hang the tabletop in the lower wall
rail.
4. Tilt the table top down until it rests on the support.
5. Place the cushion onto the lowered tabletop.
6.4.2 Adjusting the tabletop of the (optional) Primero Comfort pedestal table
Fig. 162: Clamp lever
Moving the tabletop horizontally
The table top can be randomly adjusted 12.5 cm to either side.
The clamp lever (1) can be easily reached from both sides.
1. Releasing the clamp lever (1) underneath the tabletop.
2. Carefully push the tabletop in the desired position.
3. Tighten the clamp lever again.