Operating manual and inspection booklet
Tightness guarantee
3435216 213
Measurements Measured values up to 20 % are considered normal. For
measured values greater than 20 %, check whether
condensation has accumulated.
Measurement Measured value
Floor measurements on the connecting
points of the front/rear/side
Measurements in the interior/walls, window
apertures, roof hatch, cable conduit for the
third brake light, etc.
Spray with special sealant Sealed points/edges
Wheel housing
Cut-out edges in the floor plates
Butt joints
Installation openings in the under-body
To Next Page
Loading...