Operating manual and inspection booklet
Camping
3435216 131
Combination blind
Fig. 118: Combination blind
The hinged windows are fitted combination blinds consisting of a
fly screen and a blackout blind. Both blind components are hung
from the window top.
For both blinds:
To close, use the handle to pull the fly screen fully downward
and slightly push against the window until the lower strip
latches.
To open, push the handle downward and slightly pull toward
yourself until the lower strip detaches. Due to the tension, the
blind automatically rolls up – hold the handle during this
action.
The blackout blind can be lowered in three different heights. It
latches in one of three possible positions in the lateral guide rails.
ATTENTION
Damage to the blinds if they fly up!
To avoid damage to the blind, ensure that the blind
CANNOT fly up.
Do not keep the blind closed during driving and over a
longer period of time (several weeks).
Over time, the springs would suffer if the blinds are
permanently lowered.
Re-tensioning the blinds
Use a screwdriver to re-tension the blind springs.
Insert the screwdriver and turn once or twice clockwise.
Check the tension and repeat the process, if required. Ensure
that you don't over-tension the springs.
Blind care
As a rule, never use aggressive cleaning agents (solvents or
abrasives). Use a damp cloth and soapy water to clean the blinds
and frame parts. Use a soft brush and/or damp cloth to clean the
fly screen.
To Next Page
Loading...