Operating manual and inspection booklet
Malfunctions
196 3435216
Alarm Cause Remedy
If the filling level "Water tank" is
displayed:
The tank is empty
Fill tank
If the filling level "Waste water
tank" level is displayed:
The waste water tank is full.
Empty the tank
If the filling level of a tank is
displayed, the numerical value
and "%" flash, indicating a
sensor fault.
Clean sensor; check wiring, if
necessary.
During the operation, the 12 V
ON" symbol flashes:
An error code is present
Switch the 12 V supply voltage for
the living area off and back on.
All imminent error codes are
displayed one after the other.
For the meaning of the error
codes refer to the operating and
control panel LT 632 instruction
manual.
To Next Page
Loading...