Operating manual and inspection booklet
Technical data
3435216 35
NOTE
The actual factory-weighed mass may vary slightly
afterwards due to weather conditions and, for
example, the associated absorption or release of
moisture. Any further subsequent modification of your
vehicle, e.g. through the additional installation of
optional equipment by the dealer or other
attachments and/or conversions, will additionally
influence the actual weighed mass communicated
and consequently also the remaining load capacity. It
is the responsibility of the dealer after picking up the
vehicle at the factory until delivery, and subsequently
your responsibility from the time of handover by the
dealer, to ensure that the technically permissible
mass is not exceeded. If you are not sure whether the
loaded vehicle complies with the technically
permissible mass, you can weigh/check the vehicle
on public scales or have it weighed by certain
dealers.
We will inform your dealer of the actual weighed mass
of your vehicle and the remaining load capacity when
we issue the invoice. Your dealer is required to pass
on the information to you. If you have not received
this information, you can contact your dealer and
request it. Our scales meet all legal and standard
requirements and are regularly maintained, tested
and, calibrated. Nevertheless, a slight tolerance is
technically unavoidable. Moreover, the weight of the
vehicle may vary slightly due to weather conditions
and, for example, the associated absorption or
release of moisture. The actual weight of the vehicle
may therefore deviate from the actual vehicle mass
communicated by a few kilograms.
To Next Page
Loading...