Operating Manual
- Page 77 -
7.3 F3 Menu (F3 Key)
7.3.1 Numerical Move
Allows the tip to be positioned numerically by entering a number for the X, Y and Z values.
7.3.2 Save Temp Point
Save Temp Point saves the current XYZ position in a temporary memory area numbered (1 – 9).
The save temp point function is also used with the Relocate Data function.
See SECTION 7:7.2.6.4 Relocate Data.
7.3.3 Move To Temp Point
Move To Temp Point retrieves a XYZ position, which was stored with Save Temp Point.
7.3.4 Undo Program
Cancel the last change to the program. Returns to the program state prior to the last change.
7.3.5 Redo Program
Re-do the last change to the program, which was cancelled with Undo.
To Next Page
Loading...
General