Loewe Connect ID 46 - Control Unit Front Side of the Device

Connect ID 32-46 - 10 -
Operating instructions
Functions of the operating elements
1
Mains switch:
The mains switch is located on the bottom of the set.
Always return the TV set to Standby mode before switching it off
with the main switch.
2
On/Off button:
Switch on from the standby mode
Switch off to the standby mode
3
Display:
red = Standby
green = Operation
yellow = Operation without on-screen display
(Radio, EPG data capture, timer recording, software
update or archive recording via USB
(1
).
4
Display DR
+
(2
:
white = Digital Recorder inactive
(no recording, no playback)
green = Digital Recorder active (DR continuous operation
switched on or archive playback)
red = Digital Recorder active
(archive recording)
5
Infrared transmitter:
When showing 3D content, the 3D glasses Loewe Active Glasses 3D
are controlled via the infrared sensor.
6
Button M:
Call the menu
in the menu: up/down 
7
Button R:
Radio on/off (back to TV mode)
Switch on the radio from the standby mode
in the menu: down 
8
Button +:
Station up
in the menu: to the right 
9
Button – :
Station down
in the menu: to the left 
DR
+
M
R
+
-
1
3
6
8
9
2
4
7
5
(1
USB recording is only possible for devices without DR
+
(integrated hard disc recorder).
(2
Only for devices with DR
+
(integrated hard disc recorder).

Control unit front side of the device