Appendix D
9-10
Use the arrow keys to move the cursor to DOWNLOAD Then press Enter. The Download
Firmware screen will appear as shown below. The current firmware is in BANK 1.
NOTE:
Depending on past downloads, the current firmware can be in BANK 1 or BANK 2.
The Loop-V 4200-9 we used in these sample screens has the current firmware in
BANK 1. Your Loop-V 4200-9 may have it in BANK 2. If that is the case, then all of
the following descriptions you see will have BANK 1 and BANK 2 interchanged.
LOOP V4200-9 === Download Firmware === 16:26:18 08/18/2003
ARROW KEYS: CURSOR MOVE, Please Input: nnn.nnn.nnn.nnn, BACKSPACE to edit
Current Software Ver.: V3.07 01/01/2003
Current Firmware Bank: 1
NextBootFirmware Bank: 1
TFTP Server IP : 192.168.100.206
Firmware File Name :
<< Press ESC key to abort, ENTER key to continue >>
Use the arrow keys to move the cursor down to Firmware File Name. Then key in a file
name and press Enter.
LOOP V4200-9 === Download Firmware === 16:27:17 08/18/2003
ARROW KEYS: CURSOR MOVE, BACKSPACE to edit, ESC to abort
Current Software Ver.: V3.07 01/01/2003
Current Firmware Bank: 1
NextBootFirmware Bank: 1
TFTP Server IP : 192.168.100.206
Firmware File Name : l4200v38.run
<< Press ESC key to abort, ENTER key to continue >>
A prompt will ask “Really want to download?” Press Y.
LOOP V4200-9 === Download Firmware === 16:27:32 08/18/2003
ARROW KEYS: CURSOR MOVE, BACKSPACE to edit, ESC to abort
Current Software Ver.: V3.07 01/01/2003
Current Firmware Bank: 1
NextBootFirmware Bank: 1
TFTP Server IP : 192.168.100.206
Firmware File Name : l4200v38.run
Really want to Download ?
<< Press ESC key to abort, ENTER key to continue >>
To Next Page
Loading...