12
Setting the Date and Time
Setting the Date and Time
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1. Click to open the Setup Menu. Login with your system password (by default, 111111).
2. Select System and press .
3. Select Time Set and press . The Time Set menu appears.
Figure 6.3 Time Set screen
4. Under Time Set, press to select the date and time (yyyy/mm/dd and hh/mm/ss)
and press to change values.
5. Press and then select Apply and press . The new time is saved.
6. Press repeatedly to exit all menus.