17
Searching for Recorded Video
Event List
You can also search for recorded video data by using the Event List.
Note: The Event List contains events which have occured over the last 4 hours.
Event List
068 08/12/17 12:07:00 MOT OXXX
067 08/12/17 12:06:33 TIME
066 08/12/17 12:05:46 REC START
065 08/12/17 12:05:40 MOT OXXX
064 08/12/17 12:03:17 MOT OXXX
063 08/12/17 12:03:12 MOT OXXX
062 08/12/17 12:02:48 MOT OXXX
061 08/12/17 12:01:12 MOT OXXX
060 08/12/17 12:00:00 MOT OXXX
059 08/12/17 11:59:34 MOT OXXX
Figure 9.1 Event List
2
1
6
5
4
3
PAGE (01/07)
1. Event Number: The system tags each event with a number; the highest number indicates the most
recent event.
2. Date: The date the event occured (yy/mm/dd).
3. Time: The time the event occured (hh/mm/ss).
4. Message: System messages for particular instances:
• REC START: Recording started on the system
• REC STOP: Recording stopped on the system.
• TIME: time changed on system’s internal clock (the system saves a 4-hour block for each recorded
event).
• POWER ON: The system has been powered on.
5. MOT Status: Motion status for channels 1~4. 0 = motion detection enabled; X = motion detetction
disabled.
6. Page: There are ten events for page; press to turn pages in the Event List.
To Next Page
Loading...
Need help?
General