Recording Audio
22
The system supports one channel of audio recording. You must connect a self-powered
microphone (not included).
NOTE
Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability
for use of its products that does not confirm with local laws.
22.1 Step 1 of 2: Connecting a Self-powered Microphone
1. Only channel 1 can be set to record audio from a self-powered microphone. Connect
the camera that will be near the microphone to channel 1.
2. Connect the microphone to the Audio IN (RCA) port on the system.
3. Connect a speaker to the Audio OUT (RCA) port on the system. If you are using an
HDMI TV or monitor with speakers, the HDMI cable will output audio to the speakers
on the monitor.
NOTE
External microphones and speakers have a power source. They cannot draw power from the audio
cables.
1. Microphone
2. Speaker
3. Video Cable
4. Camera
22.2 Step 2 of 2: Configuring Audio Recording
1. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
#LX400060; r.35927/36038; en-US
195
To Next Page
Loading...
Need help?
General