36
Using the Intercom
Use the Intercom feature for two-way communication between the LCD receiver and the camera.
Talk the person at the camera from behind closed doors for added security.
NOTE: Please make sure the camera(s) is properly connected
prior to using the Intercom.
To use the Intercom:
1. Press and hold the TALK button on the back of the LCD
receiver. An audio icon appears on-screen.
2. Talk in a normal speaking voice close to the LCD screen
(approximately 12 in. / 30 cm).
3. Release the TALK button to hear a response from the
camera(s).
Two-Way Audio Volume
The two-way audio volume is different from the alarm/buzzer volume found in the Main Menu
(Main Menu>Settings>Alarm Volume). Use the volume buttons on the remote control to change
the volume for two-way audio.
To change two-way audio volume:
1. From live viewing, press the Vol+ button to
increase system volume.
2.
Press the Vol- button to decrease system
volume.
Use the white volume icons on the on-screen
display to help you set the volume for two-way
audio.
C
C
a
a
m
m
1
1
Figure 9.0 Press and hold the “Talk” button and then speak into the LCD receiver; release the “Talk” button to listen
To Next Page
Loading...
Need help?
General
