Format
Use the Format menu to format the SD card. It is highly recommended to format the SD card
prior to initial recording.
ATTENTION: Formatting erases all data on the SD card. This step
cannot
be undone.
Figure 14.7 Format menu
To format the SD card:
1. Insert the SD card into the SD card slot on the right panel of the wireless receiver until you
hear a “click.” Please insert the card according to the diagram on the panel.
2. From the Main Menu, select Setting and press the Enter button.
3. From the Settings menu, select Format and press the Enter button.
4. Select Yes and press the Enter button. Please allow a few moments for formatting to finish.
Formatting time will vary depending on the size of the SD card.
53
To Next Page
Loading...
