Camera On/Off
Use the Camera On/Off menu to show/hide camera channels on the main display screen. For
example, if you disable camera 3, it will not appear in single channel full-screen, or in Quad
mode.
NOTE: If a power failure occurs on your system, you may need to re-configure your Camera
On/Off settings. For more details, see “Appendix G: Power Failure” on page 62.
Camera 1 On
Camera 2 Off
Camera 3 Off
Camera 4 Off
Fi
ure 11.0 Camera On/Off menu
Make sure cameras are properly connected and paired to the receiver before disabling.
To enable/disable cameras:
1. From the Main Menu, select Camera On/Off and press the Enter button.
2. Select the desired camera and press RIGHT/LEFT to select On or Off.
NOTE: The currently selected camera will have On/Off highlighted in RED.
3. Press the Enter button.
4. Press the MENU button to exit.
NOTE: Any disabled channels will be blacked out in Quad mode.
38
To Next Page
Loading...
Need help?
General
