Lorex LW2700 SERIES - Alarm Volume Settings; Adjusting Buzzer and Button Volume

Alarm Volume
Use the Alarm Volume menu to increase / decrease the volume of the buzzer when motion is
detected by the camera(s). The Alarm Volume also affects the volume of the “beep” that is
heard when you press a button on the remote control.
NOTE: If using AV out, changing the system alarm volume will also affect the level of audio output.
Figure 14.5 Alarm Volume menu
To increase/decrease alarm volume:
1. From the Main Menu, select Setting and press the Enter button.
2. From the Settings menu, select Alarm Volume and press the Enter button.
3. Press RIGHT to increase the alarm volume, and press LEFT to decrease the alarm volume.
4. Press the Enter button to save your settings.
5. Press the MENU button all menu windows are closed.
51