FAQ
General Questions
Q: Why can’t I open the main menu, change viewing mode, access recordings, or access
any other options while in recording mode?
A: In order to perform any changes on the system while in recording mode, you will need to stop
recording. Recording overrides other actions on the receiver.
Q: How do I turn off the Alarm (’beeping’) sound?
A:
1.Press the Menu button on the remote.
2.Navigate to Setting>Alarm Volume
3.Press the back (e) button repeatedly on the remote to turn the volume all the way
down. Note: One volume bar means the alarm sound is muted.
4.Press Enter on the remote.
Q: Can I extend the wireless range of the receiver?
A: Yes. There are optional antennas available at lorextechnology.com that help boost wireless
signals.
Q: While in Quad Viewing mode, how can I quickly go to a specific channel?
A: Press the direction button on the remote that refers to the channel number you want to view.
To now view another channel, repeatedly press the M channel button on the remote until you
have reached your desired channel.
Q: What happens to the system during a power failure while in recording mode?
A: A power failure may interrupt recording modes on the system. After power is restored, the
following occurs:
• The system will restart in Auto Sequence Mode + Motion Recording. This ensures that some
form of recording will be immediately active on the system.
• A flashing Power Failure icon will appear on-screen. The Power Failure icon indicates that a
power failure occurred while the system was actively recording.
NOTE: If you had a different display view or recording mode set when the power failure
occurred, you will need to re-apply the previous display view and recording mode.
NOTE: The flashing icon appears ONLY if the system was actively recording when the
power failure occurred. The flashing icon will disappear when you press buttons on the
receiver or remote.
IMPORTANT: If a power failure occurs during recording, you may lose video recorded
within ten minutes of occurrence of the power failure if set to Manual or Scheduled
Recording
64