Playback10
To perform an area search:
1. From the Live View display, right-click to open the Quick Menu, then click Playback.
2. Use the calendar on the right to select the day to playback.
3. Check a single channel you want to play back. Click the icon to the right of the channel name
to choose the video quality (
for Main Stream, for Sub Stream).
4. Click inside the video bar to select the playback time. The system will begin playing back
video from the selected time.
5. Click
to configure an area for the search.
6. The icon changes to
, and the camera image appears with a grid overlay. Click or click-
and-drag to add / remove squares from the grid. Solid blue areas mark the part of the image
that will be searched for motion events.
7. Click to begin area search.
10.4 Video Clip Backup
Video clip backup allows you to select a duration of video during playback mode and save it to a
USB device (not included).
To use video clip backup:
1. Connect the USB thumb drive (not included) to a free USB port on the recorder.
#LX400117; r. 6.0/57895/57895; en-US 29
To Next Page
Loading...
Need help?
General