Active Deterrence13
Lorex Active Deterrence cameras feature bright, customizable warning lights and a remote-trig-
gered siren. The recorder allows you to customize automatic light-triggering when motion is de-
tected to deter intruders (see 13.1 Automatic Deterrence Settings, page 40). You can also trigger
the lights and sirens manually using the recorder or Lorex Home connectivity software (see 13.2
Manually Activate Deterrence Features, page 42).
For a complete list of compatible deterrence cameras, navigate to your recorder series at
lorex.com/compatibility.
13.1 Automatic Deterrence Settings
Set preferences for automatic warning light triggering on compatible Lorex deterrence cameras.
To configure deterrence settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click ALARM. Click the MOTION tab on the side panel, then Deterrence on the top panel.
3. Select the channel of a connected deterrence camera.
4. Check Enable.
NOTE
This is for automatic warning light triggering only. You can manually activate the warning light and siren
without enabling automatic warning light triggering.
#LX400117; r. 6.0/57895/57895; en-US 40
To Next Page
Loading...
Need help?
General